Elite Core IM-16 Manual del usuario - Página 11
Navegue en línea o descargue pdf Manual del usuario para Sistema de altavoces Elite Core IM-16. Elite Core IM-16 20 páginas. Personal monitoring system
Imprimir página
DM-8 Distribution Module
One DM-8 Distribution Module can deliver power and audio to eight PM-16 Personal Mixers. Since
the DM-8 delivers power over the CAT5E cable, its PM-16s do not need a power supply.
Figure 5 DM-8 Distribution Module front panel (top), and rear panel (below)
The front panel has the following LEDs and connectors:
•
Power: The LED on the far left lights red when the power supply is connected to the DM-8 and
an AC power source.
•
PoE: These eight LEDs (one per Ethernet connection) light yellow to indicate that the PM-16
connected to that output is receiving power from the DM-8.
•
LINK/ACT: These eight LEDs (one per Ethernet port) light green to indicate audio activity.
•
G9: The left Ethernet connector receives input from IM-16; the right connector is not an Ether-
net connector and is reserved for future use.
•
PoE1x–PoE8x: Outputs for up to eight PM-16 Personal Mixers
The rear panel of the DM-8 has the following:
•
Power: This switch powers the DM-8 on and off.
•
48 VDC IN: Connect the 48 VDC 2.5 mA power supply to this inlet and an AC power source.
Make sure the Power switch is off before connecting the power supply!
See PM-16 System Connections to learn how to interconnect your system.
11
Elite Core PM-16 User Guide