Elite Core IM-16 Manual del usuario - Página 18

Navegue en línea o descargue pdf Manual del usuario para Sistema de altavoces Elite Core IM-16. Elite Core IM-16 20 páginas. Personal monitoring system

Imprimir página

Elite Core PM-16 User Guide

PM-16 System Without a DM-8

A PM-16 can receive audio directly from the IM-16 Input Module and pass it to other PM-16s. How-

ever, each PM-16 must use its own power supply.

To connect PM-16s without a DM-8:

1. Connect a CAT5E cable between the IM-16 Input Module's NETWORK and the PM-16 #1's

NETWORK IN connectors.

2. Connect a CAT5E cable between PM-16 #1's NETWORK OUT to the PM-16 #2's NETWORK IN.

3. Repeat step 2 until all PM-16s are daisy-chained together.

There is no limit on the number of PM-16s if all use their own power supply.

System with Additional DM-8s

If more than eight PM-16s are required, DM-8s can be daisy-chained together:

1. Follow the directions above to connect a standard PM-16 Personal Monitoring System with

one DM-8, but connect only seven PM-16 Mixers from DM-8 #1.

2. Connect a CAT5E cable between DM-8 #1's PoE 8x output and DM-8 #2's left G9 input.

3. Connect additional PM-16s to DM-8 #2.

4. If more than 15 PM-16s are required, repeat step 2 to connect DM-8 #2's PoE 8x output to DM-

8 #3's left G9 input.

There is no limit to the number of DM-8s that can be daisy-chained together. Each PM-16 con-

nected to a DM-8 does not require its own power supply.

Using LINE OUT

The ¼-in TRS LINE OUT connectors can route the PM-16's stereo output to powered speakers/monitors,

wireless IEM systems, amps or other line level devices.

If the headphone output and LINE OUT are used simultaneously, set the headphone level first, then

attenuate the powered speakers and/or amps.