ADDER ADDERLink INFINITY 3000 Manual de inicio rápido - Página 2
Navegue en línea o descargue pdf Manual de inicio rápido para Receptor ADDER ADDERLink INFINITY 3000. ADDER ADDERLink INFINITY 3000 2 páginas.
También para ADDER ADDERLink INFINITY 3000: Inicio rápido (2 páginas)
Imprimir página
Status indicator
ALIF 3000
–––––––––––––––
Searching...
• Off
No power.
• Green
All services present as
compared to the configuration
required.
• Amber
Running but video, USB or
network link missing (or not
connected to a transmitter/VM).
• Red
Booting before processor
loaded or failed.
• Blue
Factory reset mode active.
• Red/green flash
Booting into factory recovery
mode.
• Green/blue flash
Upgrade mode active.
• Fast green flash
Identify mode active.
To perform a manual factory reset
A factory reset returns ALIF3000 unit to its default
configuration.
1 Power on the ALIF3000 unit.
2 Press-and-hold the button located next to the front
panel OLED screen for 10 seconds until the indicator
turns blue and the OLED screen shows the message:
In factory reset mode
3 You can now either:
• Continue with the factory reset: Use a long narrow
implement (e.g. a straightened-out paper clip) to
press-and-release the recessed reset button on the
front panel.
• Return to normal operation without resetting:
Press the button next to the OLED screen again.
4 Once the factory reset has been carried out the unit
should now be ready for discovery by an AIM server.
Connections
Status
indicator
Gigabit
Ethernet
MANAGEMENT SERVER
AIM Server
A d
Secondary fiber or copper link (using 1GbE SFP modules) - KVM and VM links
Primary fiber or copper link (using 1GbE SFP modules) - KVM and VM links
AdderLink
www.adder.com
Reset
switch
Head
phones
d e r
L i n
k
3 0 0 0
1
2
Mic
Line
USB
out
1
3
5
12VDC
4
6
Power
USB
Secondary
in
display
Primary
display
CATx copper link - VM-only link
Gigabit
Ethernet
RJ45
network
port
1
2
3
2
Secondary
SFP port
Primary
SFP port