AnyTone ARES II Manual de instrucciones - Página 14
Navegue en línea o descargue pdf Manual de instrucciones para Radio AnyTone ARES II. AnyTone ARES II 16 páginas.
También para AnyTone ARES II: Manual de instrucciones (16 páginas)
Imprimir página
FUNCTION MENU
1. Press the [UP] key of the microphone to enter into the radio function menu.
2. Rotate the channel switch or press the [UP/DN] key of the microphone to select the
menu function options.
3. Press the [PTT] key of the microphone to enter into the menu setting.
4. Rotate the channel switch to select the desired setting.
5. Turn off to save and exit the function settings.
No.
Function
1
BEEP
2
Roger◆Beep
3
WX◆alarm
4
Dimmer
5
NPC
6
VOX◆level
7
VOX◆◆delay
8
Scan◆type
9
Micrphone◆type
10
Fine◆adjust
11
SWR◆display
12
Reset
LCD
Description
Display
Available setting: oF, 01-09 levels
Default: oF
Available◆setting:◆oF,◆01-05◆levels◆
Default:◆oF
Available◆setting:◆oF,◆on
Default:◆on
Available◆setting:1-3
Default:◆3
Available◆setting:◆oF,◆on
Default:◆on◆(◆It◆is◆valid◆for◆AM/SSB◆mode◆only,◆adjust◆MIC
to◆control◆microphone◆gain)
Available◆setting:◆oF,◆01-09◆levels◆
Default:◆oF
Available◆setting:◆01-09◆levels◆
Default:◆3
Available◆setting:◆ti(◆timne◆scan),◆◆Sq(◆squelch◆scan)
Default:◆Sq
Available◆setting:◆EL(condenser),◆◆dy(◆dynamic)
Default:◆EL
oF:◆turn◆on◆frequency◆fine◆adjustment.
r:◆turn◆on◆fine◆adjustment◆for◆RX◆frequency
t:◆turn◆on◆fine◆adjustment◆for◆TX◆frequency
rt:◆turn◆on◆fine◆adjustment◆for◆TX◆/RX◆frequency
Default:◆rt◆(±500Hz)
on:◆turn◆on◆SWR◆display
oF:◆turn◆off◆SWR◆display
Default:◆oF
NB/ANL◆slide◆switch◆to◆OFF,◆press◆PTT◆to◆reset◆all◆radio◆data◆ ◆
to◆factory◆default
NB/ANL◆slide◆switch◆to◆NB/ANL,◆press◆PTT◆to◆reset◆all◆channel◆
data◆◆to◆factory◆default
10