AnyTone ARES II Instruction Manual - Page 14

Browse online or download pdf Instruction Manual for Radio AnyTone ARES II. AnyTone ARES II 16 pages.
Also for AnyTone ARES II: Instruction Manual (16 pages)

AnyTone ARES II Instruction Manual

FUNCTION MENU

1. Press the [UP] key of the microphone to enter into the radio function menu.
2. Rotate the channel switch or press the [UP/DN] key of the microphone to select the
menu function options.
3. Press the [PTT] key of the microphone to enter into the menu setting.
4. Rotate the channel switch to select the desired setting.
5. Turn off to save and exit the function settings.
No.
Function
1
BEEP
2
Roger◆Beep
3
WX◆alarm
4
Dimmer
5
NPC
6
VOX◆level
7
VOX◆◆delay
8
Scan◆type
9
Micrphone◆type
10
Fine◆adjust
11
SWR◆display
12
Reset
LCD
Description
Display
Available setting: oF, 01-09 levels
Default: oF
Available◆setting:◆oF,◆01-05◆levels◆
Default:◆oF
Available◆setting:◆oF,◆on
Default:◆on
Available◆setting:1-3
Default:◆3
Available◆setting:◆oF,◆on
Default:◆on◆(◆It◆is◆valid◆for◆AM/SSB◆mode◆only,◆adjust◆MIC
to◆control◆microphone◆gain)
Available◆setting:◆oF,◆01-09◆levels◆
Default:◆oF
Available◆setting:◆01-09◆levels◆
Default:◆3
Available◆setting:◆ti(◆timne◆scan),◆◆Sq(◆squelch◆scan)
Default:◆Sq
Available◆setting:◆EL(condenser),◆◆dy(◆dynamic)
Default:◆EL
oF:◆turn◆on◆frequency◆fine◆adjustment.
r:◆turn◆on◆fine◆adjustment◆for◆RX◆frequency
t:◆turn◆on◆fine◆adjustment◆for◆TX◆frequency
rt:◆turn◆on◆fine◆adjustment◆for◆TX◆/RX◆frequency
Default:◆rt◆(±500Hz)
on:◆turn◆on◆SWR◆display
oF:◆turn◆off◆SWR◆display
Default:◆oF
NB/ANL◆slide◆switch◆to◆OFF,◆press◆PTT◆to◆reset◆all◆radio◆data◆ ◆
to◆factory◆default
NB/ANL◆slide◆switch◆to◆NB/ANL,◆press◆PTT◆to◆reset◆all◆channel◆
data◆◆to◆factory◆default
10