AnyTone BT01 Manual del usuario - Página 17

Navegue en línea o descargue pdf Manual del usuario para Micrófono AnyTone BT01. AnyTone BT01 20 páginas. Bluetooth microphone

Imprimir página

Max VOL Set

Slot Set

Aprs Type

Zone Select

Roaming Set

APRS Set

Zone Up

Zone Dn

Speaker Mode

Ch.Name

GPS On/Off

CDT Scan

TBST Send

Aprs Send

Ana APRS Info

GPS Roaming

NoiseReduc(R) Set the noise reduce level for receiving audio

NoiseReduc(T)

In standby, press the key programmed as" Max

Volume", will enable users to set the maximum RX

volume.

Choose Slot for current channel, this function is only

valid in repeater mode.

Choose analog or digital Aprs Type for current

channel.

In standby, press the programmed "Zone Select"

key, it will allow you input the zone number and then

press confirm key will switch to the zone.

Enter into Roaming menu quickly

Enter into APRS menu quickly

Switch the zone upwardly

Switch the zone downwardly

Set the voice come out from speaker on microphone

or radio.

Switch between channel name display and

frequency display for the current channel

Enable / disable the GPS.

Enable / disable the CTCSS/DCS scanning for

the analog channel.When the radio finds matched

CTCSS/DCS for current channel, it will open the

speaker and start receiving.

Only the analog channels with CTCSS/DCS

signalling is able to start the CDT scanning.

Send the TBST Tone

Manually transmit the APRS at the current channel.

Fast access to the anglog APRS info menu

Enable/disable the GPS roaming function

Set the noise reduce level for transmitting audio