AnyTone BT01 Посібник користувача - Сторінка 17
Переглянути онлайн або завантажити pdf Посібник користувача для Мікрофон AnyTone BT01. AnyTone BT01 20 сторінок. Bluetooth microphone
Друкувати сторінку
Max VOL Set
Slot Set
Aprs Type
Zone Select
Roaming Set
APRS Set
Zone Up
Zone Dn
Speaker Mode
Ch.Name
GPS On/Off
CDT Scan
TBST Send
Aprs Send
Ana APRS Info
GPS Roaming
NoiseReduc(R) Set the noise reduce level for receiving audio
NoiseReduc(T)
In standby, press the key programmed as" Max
Volume", will enable users to set the maximum RX
volume.
Choose Slot for current channel, this function is only
valid in repeater mode.
Choose analog or digital Aprs Type for current
channel.
In standby, press the programmed "Zone Select"
key, it will allow you input the zone number and then
press confirm key will switch to the zone.
Enter into Roaming menu quickly
Enter into APRS menu quickly
Switch the zone upwardly
Switch the zone downwardly
Set the voice come out from speaker on microphone
or radio.
Switch between channel name display and
frequency display for the current channel
Enable / disable the GPS.
Enable / disable the CTCSS/DCS scanning for
the analog channel.When the radio finds matched
CTCSS/DCS for current channel, it will open the
speaker and start receiving.
Only the analog channels with CTCSS/DCS
signalling is able to start the CDT scanning.
Send the TBST Tone
Manually transmit the APRS at the current channel.
Fast access to the anglog APRS info menu
Enable/disable the GPS roaming function
Set the noise reduce level for transmitting audio
11