AnyTone BT01 Посібник користувача - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник користувача для Мікрофон AnyTone BT01. AnyTone BT01 20 сторінок. Bluetooth microphone

AnyTone BT01 Посібник користувача
Each [P1], [P2], [P3] key allows to assign different functions for
short press, long1 press and long2 press.
Short : Function takes effect after click on the button.
Long1: Function takes effect after "du" beep, it needs approx 1.5s
for the press.
Long2: Hold pressing the button until function takes effect, it needs
approx 3s for the press.
OFF
Volt
Tx Power
TalkAround
Reverse
Digi Encrypt
Call
VFO / MR
Scan
AM air/FM
Alarm
Record Switch
Record
Messages
Dial
GPS Info
Monitor
No Function
Check the current battery capacity voltage
Switch the power between super high, high, middle
and low power.
Switch between Talk Around and Repeater mode
Turn on/off the frequency reverse function.
Choose the digital encryption group for digital
channel
In Analog mode, send the DTMF/5TONE/2TONE
encode. This function is only valid for analog
channel.
Switch between VFO mode and memory channel
mode.
Scan on/off
Turn on/off AM air band receive or FM radio receive
Long press the key to start alarm, short press again
to exit the alarm.
Enable/disable the recording function
Start/stop recording. When stop recording, the radio
will remind repeat or send the record.
In digital mode, press to enter into SMS messages
Start the manually dial
Check the GPS position information
Monitor the weak signal or the signal with
unmatched ID.
9