Dudley Resan Vandal Resistant Urinal Instrucciones de montaje - Página 2
Navegue en línea o descargue pdf Instrucciones de montaje para Aseos Dudley Resan Vandal Resistant Urinal. Dudley Resan Vandal Resistant Urinal 4 páginas.
Imprimir páginaWarning
18kg heavy product. It is recommended that at least two people carry out the installation to
prevent personal injury or any damage to the urinal.
Important
Please read these instructions carefully before installation.
Disclaimer
1. The specifications of this product can change without notice as a result of continual product
development.
2. These instructions are intended to be a general guide only as specific conditions vary from
installation to installation.
3. The images in these instructions are for illustrative purposes only and may vary slightly from
the actual product as a result of continual product development.
4. Check the product for defects or damage prior to fitting. Fitting the product is an acceptance
that the product is free from defects and Thomas Dudley Limited cannot retrospectively
accept responsibility for any defects subsequently discovered.
Component Checklist
1. Urinal
2. 3 x M10 threaded fixing studs
3. 3 x M10 lock nuts
4. 3 x M10 washers
5. Paper drilling template
6. Instruction leaflet
Equipment Checklist: Not Supplied
1. Drill, masonry bits and hole saw (optional) suitable to create required holes.
2. Adjustable Spanner
3. Spirit level
4. Pencil
Unpacking
1. Unpack the urinal and rest on a soft grit free surface to avoid scratches or other damage to
the surface finish.
2. Check for any defects.
02020 iss1 R325610
2 of 4