Anywhere Cart AC-GO Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Carrito de exterior Anywhere Cart AC-GO. Anywhere Cart AC-GO 8 páginas. 32 device secure smart charging cart

Imprimir página

TROUBLESHOOTING

Power

Input

External LED Button is flashing green and devices are not charging

Overload Protection Mode has been activated.

Verify devices don't exceed 1400 watts at one time by multiplying

your device's AC adapter wattage by 16.

Reduce the number of devices if necessary and resume charging.

Testing the Power Cord

Check the main Power Cord into the

left side of the

Charging System

Plug the cart into a wall outlet and press the internal

PWR directly on the

If the system does not power on, test your Power Cord by removing it and

plugging in a PC monitor style IEC Power Cord.

Testing the Power Strips

Open the side panel doors and locate the

Verify each switch is in the "RESET" position, not the "OFF" position.

Using an extension cord, test each

from the charging system and plugging them into the extension cord.

If one or more

Power Strips

Testing the External Power Button

With your cart plugged in, open the rear panel door and press the internal

labeled PWR on the charging system.

Power Button

If your cart powers on, unplug the

Using a small flat head screwdriver, ensure all individual wires are secure.

Plug the

External Cable

If the External Power Button does not light up or power on, replace it.

External

Cable

Power Input

to verify it is secure.

Charging

System.

Power

Power Strip

no longer works, replace as needed.

External Cable

back in and press the External Power Button.

Charging

System

Power

Button

port located on the

Power Button

Strips.

by unplugging each cord

from

Charging System.

USER GUIDE

100 Watts

16 Devices

1600 Watts

100W

Power Cord

labeled

External Power Button

- Part # 1320399

- Part # 1321375