Anywhere Cart AC-GO Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Открытая тележка Anywhere Cart AC-GO. Anywhere Cart AC-GO 8 страниц. 32 device secure smart charging cart
Печатать страницу
TROUBLESHOOTING
Power
Input
External LED Button is flashing green and devices are not charging
Overload Protection Mode has been activated.
Verify devices don't exceed 1400 watts at one time by multiplying
your device's AC adapter wattage by 16.
Reduce the number of devices if necessary and resume charging.
Testing the Power Cord
Check the main Power Cord into the
left side of the
Charging System
Plug the cart into a wall outlet and press the internal
PWR directly on the
If the system does not power on, test your Power Cord by removing it and
plugging in a PC monitor style IEC Power Cord.
Testing the Power Strips
Open the side panel doors and locate the
Verify each switch is in the "RESET" position, not the "OFF" position.
Using an extension cord, test each
from the charging system and plugging them into the extension cord.
If one or more
Power Strips
Testing the External Power Button
With your cart plugged in, open the rear panel door and press the internal
labeled PWR on the charging system.
Power Button
If your cart powers on, unplug the
Using a small flat head screwdriver, ensure all individual wires are secure.
Plug the
External Cable
If the External Power Button does not light up or power on, replace it.
© 2020 Anywhere Cart | 42035 Zevo Drive, Temecula CA 92590, USA | 888-650-4488 | www.AnywhereCart.com
External
Cable
Power Input
to verify it is secure.
Charging
System.
Power
Power Strip
no longer works, replace as needed.
External Cable
back in and press the External Power Button.
Charging
System
Power
Button
port located on the
Power Button
Strips.
by unplugging each cord
from
Charging System.
USER GUIDE
100 Watts
X
16 Devices
1600 Watts
100W
Power Cord
labeled
External Power Button
- Part # 1320399
- Part # 1321375