Addi-Data CPCIs-1711 Descripción de la función - Página 15
Navegue en línea o descargue pdf Descripción de la función para Tarjeta PCI Addi-Data CPCIs-1711. Addi-Data CPCIs-1711 17 páginas. Multifunction counter board, optically isolated
También para Addi-Data CPCIs-1711: Descripción de la función (15 páginas)
Imprimir página
Technical data and limit values
3 Technical data and limit values
3.1 Digital inputs and outputs (50-pin header)
APCIe-1711, CPCIs-1711
Max. input voltage:
Max. output current:
Signal thresholds:
Input logic 1:
Input logic 0:
Output logic 1:
Output logic 0:
APCI-1710
Max. input voltage:
Max. output current:
Signal thresholds:
Input logic 1:
Input logic 0:
Output logic 1:
Output logic 0:
www.addi-data.com
NOTICE!
The TTL inputs and outputs are not optically isolated.
Please make sure that no signal from the peripherals is connected
to the inputs and outputs when the PC system is switched off or
being booted up or shut down. This can be realised by means of a
relay or tri-state circuit between the peripherals and the TTL
inputs and outputs.
Moreover, the TTL outputs must be protected against short-circuit
through the connected signals.
4 V (PC supply voltage = 3.3 V ± 5%)
40 mA (no short-circuit protection)
1.7 V min.
0.8 V max.
2.4 V min. (PC supply voltage ≥ 3 V)
0.45 V max. (PC supply voltage ≥ 3 V)
4.75 V (PC supply voltage = 5 V ± 5%)
25 mA (no short-circuit protection)
2 V min.
0.8 V max.
2.4 V min. (PC supply voltage ≥ 4.75 V)
0.45 V max. (PC supply voltage ≥ 4.75 V)
15
TTL I/O