Addi-Data CPCIs-1711 İşlev Açıklaması - Sayfa 15

PCI Kart Addi-Data CPCIs-1711 için çevrimiçi göz atın veya pdf İşlev Açıklaması indirin. Addi-Data CPCIs-1711 17 sayfaları. Multifunction counter board, optically isolated
Ayrıca Addi-Data CPCIs-1711 için: İşlev Açıklaması (15 sayfalar)

Sayfayı Yazdır
Addi-Data CPCIs-1711 İşlev Açıklaması

Technical data and limit values

3 Technical data and limit values

3.1 Digital inputs and outputs (50-pin header)

APCIe-1711, CPCIs-1711
Max. input voltage:
Max. output current:
Signal thresholds:
Input logic 1:
Input logic 0:
Output logic 1:
Output logic 0:
APCI-1710
Max. input voltage:
Max. output current:
Signal thresholds:
Input logic 1:
Input logic 0:
Output logic 1:
Output logic 0:
www.addi-data.com
NOTICE!
The TTL inputs and outputs are not optically isolated.
Please make sure that no signal from the peripherals is connected
to the inputs and outputs when the PC system is switched off or
being booted up or shut down. This can be realised by means of a
relay or tri-state circuit between the peripherals and the TTL
inputs and outputs.
Moreover, the TTL outputs must be protected against short-circuit
through the connected signals.
4 V (PC supply voltage = 3.3 V ± 5%)
40 mA (no short-circuit protection)
1.7 V min.
0.8 V max.
2.4 V min. (PC supply voltage ≥ 3 V)
0.45 V max. (PC supply voltage ≥ 3 V)
4.75 V (PC supply voltage = 5 V ± 5%)
25 mA (no short-circuit protection)
2 V min.
0.8 V max.
2.4 V min. (PC supply voltage ≥ 4.75 V)
0.45 V max. (PC supply voltage ≥ 4.75 V)
15
TTL I/O