Duerkopp Adler 739 Instrucciones de instalación y lista de piezas de repuesto - Página 5
Navegue en línea o descargue pdf Instrucciones de instalación y lista de piezas de repuesto para Máquina de coser Duerkopp Adler 739. Duerkopp Adler 739 12 páginas.
Imprimir página
3.3 Adjustment of working height
4
3
The working table can be adjusted continuously to a height between
820 mm and 1080 mm. Upon delivery, the sewing unit is set to the
lowest working height.
To adjust the working height, proceed as follows:
–
Loosen locking screws 1, 2, 3 and 4 at the struts of the frame.
–
Adjust working height to desired level by using suitable tools.
To prevent jamming, simultaneously lift table at both sides.
–
Tighten locking screws 1, 2, 3 and 4 at the struts
2
1
2-5