Duerkopp Adler 739 설치 지침 및 교체 부품 목록 - 페이지 5

{카테고리_이름} Duerkopp Adler 739에 대한 설치 지침 및 교체 부품 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 739 12 페이지.

3.3 Adjustment of working height

The working table can be adjusted continuously to a height between

820 mm and 1080 mm. Upon delivery, the sewing unit is set to the

lowest working height.

To adjust the working height, proceed as follows:

–

Loosen locking screws 1, 2, 3 and 4 at the struts of the frame.

–

Adjust working height to desired level by using suitable tools.

To prevent jamming, simultaneously lift table at both sides.

–

Tighten locking screws 1, 2, 3 and 4 at the struts

2-5