AIRVERSA Purelle Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Limpiador de aire AIRVERSA Purelle. AIRVERSA Purelle 20 páginas.

Sleep Mode Button

Tap to turn Sleep Mode on/off

Sleep Mode operate quietly by using

a fan speed lower than low speed. It

will turn off the display after 10

seconds if no other buttons are

touched. When the display is turned

off, tap any button to turn the display

back on.

Fan Speed Button

Tap to cycle through fan speeds

Tapping the Fan Speed Button while

the air puriﬁer is in Auto Mode will

exit that mode.

Filter Status Indicator

Press & Hold to reset ﬁlters

Blinks red when the ﬁlter should be

checked or replaced.

Press and hold for approx. 5s

to reset the Filter Status Indicator.

Network Indicator

Indicates pairing status

Product has been paired to the

network > Light stays on

Product has not been paired to the

network > Light will blink and then

turn off after 5 minutes each time

when the product is powered on.

Long press 10s to enter pairing mode.

Child Lock

Prevents current settings from

being changed

Press and hold for 5 seconds to turn

Display Lock on/off. The indicator will

blink 3 times along with 2 beeps

when any other button is tapped to

indicate that Display Lock is on.

Filter Life Indicator

Indicates ﬁlter consumption

Power Button

Tap to turn Purelle on/off