Addictive Desert Designs ADD-Lander Manual de inicio rápido - Página 3

Navegue en línea o descargue pdf Manual de inicio rápido para Accesorios para automóviles Addictive Desert Designs ADD-Lander. Addictive Desert Designs ADD-Lander 5 páginas. 2005-current toyota tacoma overland rack
También para Addictive Desert Designs ADD-Lander: Manual de instrucciones de instalación (6 páginas)

Imprimir página

ADDICTIVE DESERT DESIGNS® ®

ADDICTIVE DESERT DESIGNS

Installation:

3. Slide the supplied Square Nuts (6 per side) into the rail system in the bed of the Jeep. Make sure to line them

up about where the mounting holes of the chase rack are going to land. (Fig C)

Fig C

4. Install the supplied 1/2" x 1" Bolts (6 per side) and 1/2" Washers (6 per side) into the side rail. If the 1" long

bolts don't reach, you will have to use the start 1 1/2" long bolt into one of the holes to bring the chase rack rail

closer to the truck bed rail. Once the chase rack is close enough to the bed rail, start the 1" bolt in the hole right

next to the one you've started the 1 1/2" long bolt in. Then, remove the 1 1/2" long bolt and reinstall the 1" long

bolt. Do not tighten the 1 1/2" long bolt all the way (it will hit the back of the bed rail), only use it to bring

the chase rack closer to the bed rail. Leave these bolts loose for now. (Fig D)

Fig D

Addictive Desert Designs® | Page 3

2020-Current Jeep Gladiator JT ADD-Lander™

Overland Rack Installation Instructions