AODELAN WM2 Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Micrófono AODELAN WM2. AODELAN WM2 12 páginas.

Precautions for Use

 If the fur wind screen is wet, remove it from the transmitter and let it dry in the shade.

 When attaching or removing the fur wind screen, be sure to hold its chassis.

Recording

Recording with the Transmitter (TX)

Use the receiver connected to a camera (or a smartphone) and the transmitter attached to the

subject's clothing for recording sound.

1. Turn on the power of the transmitter, receiver and the connected device.



After both the transmitter and receiver are turned on, the state lamp

in blue, indicating that a communication connection has been established between the devices and

clear audio recording is available.



If no connection is established – the state lamp on the receiver blinks once per second, bring the

transmitter and the receiver closer to each other for another attempt. The devices may be under

influence of environmental or other factors.

2. Ensure that the state lamp on the receiver is lit, and press the record start button on the camera

(or smartphone).

Precautions for Use

 Do not touch the transmitter while recording, as this will cause the noise generated when

touching to be recorded.

 If the transmitter is placed near speakers/headphones, a high pitched noise may be heard

(howling

effect).

speakers/headphones repeatedly. In this case, place the transmitter as far as possible from the

speakers/headphones.

改为发射器

This

caused

the

transmitter

on the receiver stays lit

catching

sound

from

the