AODELAN WM2 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Micrófono AODELAN WM2. AODELAN WM2 12 páginas.

 If the transmitter is placed in close proximity to the camera (or smartphone), noise may also be

recorded due to RF interference. Keep the transmitter at least 1m (3 ft.) from the camera (or

smartphone) during use.

 If there is noise or there is no sound because of deteriorating communication, the state lamp

on the receiver blinks once per second. Ensure that the distance between the devices is

not too far, and no obstacles are between them. Continue use when the state lamp

receiver is constantly lit in blue.

 When the recording is finished or you do not intend to use WM2, turn off the transmitter and

receiver to conserve the battery power.

Recording with an external microphone

Connect the supplied lavalier microphone to the transmitter for recording.

1. Make sure that the transmitter is turned off, and then connect the lavalier microphone to the

external microphone input jack on the transmitter.



The internal microphone of transmitter automatically turns off and the sound picked up by the

external microphone is recorded.

2. Attach the transmitter to a proper location, such as a belt, with the clip.

3. Clip the lavalier microphone to your desired location on the clothing, such as the collar, a breast

pocket, etc.

Precautions for Use

 When the fur wind screen is attached to the transmitter, remove it from the transmitter.

 Use an external microphone compatible with the plug-in power. The external microphone is

 Do not touch the external microphone while recording, as this will cause the noise generated

when touching to be recorded.

 If the external microphone is placed near speakers/headphones, a high pitched noise may be

heard (howling effect). This is caused by the external microphone catching sound from the

speakers/headphones repeatedly. In this case, place the microphone as far as possible from

the speakers/headphones.

 If you are using other types of audio input, such as an electric guitar, connect the device to the

"LINE IN" jack on the transmitter with a matching cable (not supplied).

External

microphone

on the