AOK CellMeter 8 Manual de usuario y manual - Página 3
Navegue en línea o descargue pdf Manual de usuario y manual para Equipos de prueba AOK CellMeter 8. AOK CellMeter 8 4 páginas. Battery voltage capacity checker / balance discharger / servo tester
Imprimir página
Will need to detect the nickel battery(NiCd and NiMH)Positive and negative pole plug correctly
inserted into CellMeter 8 NiCd/MH 3pin port,When there is no lithium battery connected to the Lithium
port of CellMeter 8,CellMeter 8 starting work after obtaining power from nickel battery,LCD screen will
display the number of nickel battery,battery total voltage,battery type and battery remaining capacity
as a percentage of the remaining capacity of the strip pattern.
(If there is a lithium battery connected to CellMeter 8 to provide power supply,Need a short press
TYPE button to switch to the nickel battery detection mode.)
Detection of the main line and positive and negative pole of the battery for the detection of nickel
battery,No lithium battery detection using a balanced line plug detection so detailed,Cannot display
the voltage value of the battery cell.Nickel battery detection mode will only show battery cell,battery
total voltage,battery type and battery remaining capacity as a percentage of the remaining capacity of
the strip pattern.Because the two types of nickel batteries have different rated voltage and their
relative power relationship(NiCd andNiMH),Therefore,the correct choice of nickel battery type is
required,The CellMeter 8 screen displays the percentage of remaining battery power and the strip
pattern that represents the rest of the battery to be accurate.Correct selection of the number of nodes
in the nickel battery,LCD screen to correctly display the remaining battery power as well as the
remaining capacity of the strip pattern.
Nickel battery detection mode,Short press TYPE button to cycle between the battery type NiCd and
NiMH.Short press CELL key can be in the CellMeter 8 intelligent judgment range manual precision
nickel batteries,In order to achieve the LCD screen to display the remaining battery power as well as
the remaining capacity of the bar pattern.
LITHIUM BATTERY BALANCE DISCHARGE / FAST DISCHARGE
6.
(Fast discharge module need to be selected independently 50W or 150W)
Balance Discharge
Will need to balance the discharge of the lithium battery balance line plug correctly inserted into the
CellMeter 8 of the 9 pin Lithium port,CellMeter 8 starting work after obtaining a working power supply
from a lithium battery,LCD screen will display the total voltage and other parameters of the lithium
battery.Press MODE (Discharge) button,CellMeter 8 to enter the balanced discharge mode,The
discharge of the lithium battery in connection with the discharge cut-off voltage(Default value:3.700V).
The voltage balance of all the battery core of the lithium battery to be connected to the user to set the
discharge cut-off voltage parameter,Such as the voltage of a power saving core of a lithium battery is
less than the discharge cut-off voltage,Press MODE (Discharge) button,Products will not be switched
to a balance discharge mode and there is a BB sound,Error setting of the user's discharge end
voltage.
After the completion of the balance of the CellMeter 8 will complete the prompt tone has been BB
sound prompts the user,Please pull out the lithium battery which has been completed by the
CellMeter 8 port.If the lithium battery after the completion of the discharge of a long time to connect to
the CellMeter8 port,Because the system power source is from the 1S and the 2S core of the lithium
battery,So the standby power consumption of the system will lead to the 1S and the 2S of the lithium
battery,The power of the lithium battery will not be in balance.
Short press MODE (Discharge) button under the balance discharge mode,enter balance mode,The
balance mode is the standard voltage value of the energy saving core with the lowest
voltage,Discharge of electric cell with high standard voltage,Until all the voltage and standard voltage
of the electric cell are equivalent to the completion of the balance function,After the completion of the
balance of the CellMeter 8 will be completed with the prompt sound has been BB prompt
users,Please pull out of the CellMeter8 port in time to complete the balance of the lithium battery.If the
lithium battery is balanced after the completion of the long connection on the CellMeter8 port,Because
the system power source is from the 1S and the 2S core of the lithium battery,So the standby power
consumption of the system will lead to the 1S and the 2S of the lithium battery,The power of the
lithium battery will not be in balance.
Fast Discharge(50W or 150W)
The signal line of the fast discharge module is connected to the Test PPM OUT Servo port on the left
corner of the CellMeter8,Correct insertion of the positive and negative poles and the direction of the
signal to the port.And plug the lithium battery into the 9 pin Lithium port of CellMeter 8,The T head of
the main power supply cord of the lithium battery is connected to the T head of the fast discharge
module,Press MODE (Discharge) button,CellMeter 8 to enter a fast balance discharge mode,Its
parameter setting and function operation with balanced discharge mode.