AOK CellMeter 8 Manuale d'uso e manuale - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso e manuale per Apparecchiature di prova AOK CellMeter 8. AOK CellMeter 8 4. Battery voltage capacity checker / balance discharger / servo tester

Stampa la pagina

Will need to detect the nickel battery(NiCd and NiMH)Positive and negative pole plug correctly

inserted into CellMeter 8 NiCd/MH 3pin port,When there is no lithium battery connected to the Lithium

port of CellMeter 8,CellMeter 8 starting work after obtaining power from nickel battery,LCD screen will

display the number of nickel battery,battery total voltage,battery type and battery remaining capacity

as a percentage of the remaining capacity of the strip pattern.

(If there is a lithium battery connected to CellMeter 8 to provide power supply,Need a short press

TYPE button to switch to the nickel battery detection mode.)

Detection of the main line and positive and negative pole of the battery for the detection of nickel

battery,No lithium battery detection using a balanced line plug detection so detailed,Cannot display

the voltage value of the battery cell.Nickel battery detection mode will only show battery cell,battery

total voltage,battery type and battery remaining capacity as a percentage of the remaining capacity of

the strip pattern.Because the two types of nickel batteries have different rated voltage and their

relative power relationship(NiCd andNiMH),Therefore,the correct choice of nickel battery type is

required,The CellMeter 8 screen displays the percentage of remaining battery power and the strip

pattern that represents the rest of the battery to be accurate.Correct selection of the number of nodes

in the nickel battery,LCD screen to correctly display the remaining battery power as well as the

remaining capacity of the strip pattern.

Nickel battery detection mode,Short press TYPE button to cycle between the battery type NiCd and

NiMH.Short press CELL key can be in the CellMeter 8 intelligent judgment range manual precision

nickel batteries,In order to achieve the LCD screen to display the remaining battery power as well as

the remaining capacity of the bar pattern.

LITHIUM BATTERY BALANCE DISCHARGE / FAST DISCHARGE

(Fast discharge module need to be selected independently 50W or 150W)

Balance Discharge

Will need to balance the discharge of the lithium battery balance line plug correctly inserted into the

CellMeter 8 of the 9 pin Lithium port,CellMeter 8 starting work after obtaining a working power supply

from a lithium battery,LCD screen will display the total voltage and other parameters of the lithium

battery.Press MODE (Discharge) button,CellMeter 8 to enter the balanced discharge mode,The

discharge of the lithium battery in connection with the discharge cut-off voltage(Default value:3.700V).

The voltage balance of all the battery core of the lithium battery to be connected to the user to set the

discharge cut-off voltage parameter,Such as the voltage of a power saving core of a lithium battery is

less than the discharge cut-off voltage,Press MODE (Discharge) button,Products will not be switched

to a balance discharge mode and there is a BB sound,Error setting of the user's discharge end

voltage.

After the completion of the balance of the CellMeter 8 will complete the prompt tone has been BB

sound prompts the user,Please pull out the lithium battery which has been completed by the

CellMeter 8 port.If the lithium battery after the completion of the discharge of a long time to connect to

the CellMeter8 port,Because the system power source is from the 1S and the 2S core of the lithium

battery,So the standby power consumption of the system will lead to the 1S and the 2S of the lithium

battery,The power of the lithium battery will not be in balance.

Short press MODE (Discharge) button under the balance discharge mode,enter balance mode,The

balance mode is the standard voltage value of the energy saving core with the lowest

voltage,Discharge of electric cell with high standard voltage,Until all the voltage and standard voltage

of the electric cell are equivalent to the completion of the balance function,After the completion of the

balance of the CellMeter 8 will be completed with the prompt sound has been BB prompt

users,Please pull out of the CellMeter8 port in time to complete the balance of the lithium battery.If the

lithium battery is balanced after the completion of the long connection on the CellMeter8 port,Because

the system power source is from the 1S and the 2S core of the lithium battery,So the standby power

consumption of the system will lead to the 1S and the 2S of the lithium battery,The power of the

lithium battery will not be in balance.

Fast Discharge(50W or 150W)

The signal line of the fast discharge module is connected to the Test PPM OUT Servo port on the left

corner of the CellMeter8,Correct insertion of the positive and negative poles and the direction of the

signal to the port.And plug the lithium battery into the 9 pin Lithium port of CellMeter 8,The T head of

the main power supply cord of the lithium battery is connected to the T head of the fast discharge

module,Press MODE (Discharge) button,CellMeter 8 to enter a fast balance discharge mode,Its

parameter setting and function operation with balanced discharge mode.