CashTester BC 131 SD Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Contadora de billetes CashTester BC 131 SD. CashTester BC 131 SD 17 páginas.

Imprimir página

3.5 Error messages and solutions

The BC 131 SD automatically performs a self-test after powering on. lf one of the following error messages

is displayed, usually a sensor is blocked by dust or banknotes are still in the stacker. Remove the

banknotes or use a brush / soft cloth to clean the sensor and then restart the machine. In any scenario

where an error (message) can't be solved, contact your supplier! Changes made to the machine by

the end user (hardware and software) will void the warranty.

Error code

Error messages

E00

Fluorescence sensor

E10

Banknote feeding sensor

E11

Banknote receiving sensor

E30/E32

Left counting sensor

E31/E33

Right counting sensor

Rotate speed sensor or

E50

main motor

E60/E70

24 IR sensor

E80

Internal memory fault

Sometimes error messages appear during usage. Please follow the instructions below to solve them:

Error code

Solutions

Banknote is damaged or folded. Please remove the notes and count again.

Some banknotes are connected or overlapped: take all the notes and count them

EJ/EC

again. If the error message frequently occurs, adjust the vertical adjusting screw

slightly in clockwise direction (+)

The banknotes are not fed straight into the machine. Ensure the banknotes are placed

neatly and inserted centered on the hopper. Use the hopper guides to center the

banknote when counting a large stack of banknotes and guide the notes also with

your hands during counting.

The dimensions of the note do not match the standard settings. Please remove the

notes and count again.

There are more than 220 banknotes in the stacker. Please remove the banknotes to

FUL

continue the counting.

Possible counterfeit or suspicious banknote:

F-C F-1

check if the problem persists. If yes, clean the MG sensor with a cleaning brush. When

F-2 F-3

the problem occurs often, contact your supplier.

F-P

Different denominations, remove the banknote and count again.

Possible counterfeit or suspicious banknote:

check if the problem persists. If yes, make sure that the device is not under direct

F-F

strong light source since this may be disrupt the UV sensors. Clean sensors and remove

any dust that may have accidentally blocked sensors. When the problem occurs

often, contact your supplier.

Possible counterfeit or suspicious banknote:

F-7/F-8

check if the problem persists. If yes, clean the IR sensor with a cleaning brush. When

the problem occurs often, contact your supplier.

3.6 Technical specifications

Counting speed:

Hopper/stacker capacity:

Power supply:

Power consumption:

Operating temperature:

Dimensions:

Weight:

Solutions

Do not place or operate the machine under strong light

Remove the banknote and clear away the dust

Clean the conveyor belt / encoder wheel of the rotate

speed sensor.

Clean the 24 IR sensor or replace it

Resume to factory setting

1000 notes per minute

200/220 notes

100~240V AC, 50/60Hz

≤ 80W

0~40 degrees Celsius

311*261*195 mm (L*W*H)

7,2 KG

Cashtester BC 131 SD

- 6 -

count the banknote again to double