CashTester BC 131 SD Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Счетчик банкнот CashTester BC 131 SD. CashTester BC 131 SD 17 страниц.

3.5 Error messages and solutions
The BC 131 SD automatically performs a self-test after powering on. lf one of the following error messages
is displayed, usually a sensor is blocked by dust or banknotes are still in the stacker. Remove the
banknotes or use a brush / soft cloth to clean the sensor and then restart the machine. In any scenario
where an error (message) can't be solved, contact your supplier! Changes made to the machine by
the end user (hardware and software) will void the warranty.
Error code
Error messages
E00
Fluorescence sensor
E10
Banknote feeding sensor
E11
Banknote receiving sensor
E30/E32
Left counting sensor
E31/E33
Right counting sensor
Rotate speed sensor or
E50
main motor
E60/E70
24 IR sensor
E80
Internal memory fault
Sometimes error messages appear during usage. Please follow the instructions below to solve them:
Error code
Solutions
Eh
Banknote is damaged or folded. Please remove the notes and count again.
Some banknotes are connected or overlapped: take all the notes and count them
EJ/EC
again. If the error message frequently occurs, adjust the vertical adjusting screw
slightly in clockwise direction (+)
The banknotes are not fed straight into the machine. Ensure the banknotes are placed
neatly and inserted centered on the hopper. Use the hopper guides to center the
ES
banknote when counting a large stack of banknotes and guide the notes also with
your hands during counting.
The dimensions of the note do not match the standard settings. Please remove the
Ed
notes and count again.
There are more than 220 banknotes in the stacker. Please remove the banknotes to
FUL
continue the counting.
Possible counterfeit or suspicious banknote:
F-C F-1
check if the problem persists. If yes, clean the MG sensor with a cleaning brush. When
F-2 F-3
the problem occurs often, contact your supplier.
F-P
Different denominations, remove the banknote and count again.
Possible counterfeit or suspicious banknote:
check if the problem persists. If yes, make sure that the device is not under direct
F-F
strong light source since this may be disrupt the UV sensors. Clean sensors and remove
any dust that may have accidentally blocked sensors. When the problem occurs
often, contact your supplier.
Possible counterfeit or suspicious banknote:
F-7/F-8
check if the problem persists. If yes, clean the IR sensor with a cleaning brush. When
the problem occurs often, contact your supplier.
3.6 Technical specifications
Counting speed:
Hopper/stacker capacity:
Power supply:
Power consumption:
Operating temperature:
Dimensions:
Weight:
Solutions
Do not place or operate the machine under strong light
Remove the banknote and clear away the dust
Remove the banknote and clear away the dust
Remove the banknote and clear away the dust
Remove the banknote and clear away the dust
Clean the conveyor belt / encoder wheel of the rotate
speed sensor.
Clean the 24 IR sensor or replace it
Resume to factory setting
1000 notes per minute
200/220 notes
100~240V AC, 50/60Hz
≤ 80W
0~40 degrees Celsius
311*261*195 mm (L*W*H)
7,2 KG
Cashtester BC 131 SD
- 6 -
count the banknote again to double
count the banknote again to double
count the banknote again to double