Casio 2330 Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Ver Casio 2330. Casio 2330 2 páginas. Casio watch user guide

Imprimir página

COUNTDOWN ALARM MODE

The countdown timer can be set within a range of 1 minute

Starting value

to 24 hours. When the countdown reaches zero, an alarm

sounds for 10 seconds or until you press any button.

To set the countdown time

Note that you cannot change the countdown time setting

while a countdown is being performed. First press A to

stop the countdown and then press C to return the count-

down time to its starting value.

1. Hold down A while in the Countdown Alarm Mode un-

til the hours digit flashes on the display. The hours digit

flashes because it is selected .

Mode indicator

2. Press B to change the selection in the following se-

quence.

Hours

3. Press C to increase the selected number. Holding down C changes the number

at high speed.

To set the starting value of the countdown time to 24 hours, set "0:00".

4. After you set the countdown time, press A to exit the setting screen.

To use the countdown timer

1. Press A while in the Countdown Alarm Mode to start

Starting value

the countdown time.

To stop a countdown operation, press A. Pressing A

again resumes the countdown.

To restart the countdown, stop it and then press C to

reset to the starting value.

2. When the end of the countdown is reached, the alarm

sounds for 10 seconds or until you stop the alarm by

pressing any button. Countdown timing stops, and the

countdown time is automatically reset to its starting

value after the alarm stops.

Hours

Seconds

Minutes

DAY COUNTER MODE

There are five day counters, each identified by a counter number. Whenever the date

specified by a day counter matches the date of the Timekeeping Mode (regardless of

the day counter's year setting), the day counter's number flashes on the Timekeep-

ing Mode and Day Counter Mode screens.

The initial default date for all Day Counters is 2001/1/1.

When setting the year, you need to specify only the rightmost two digits. To specify

the year 1970, for example, set 70. To specify the year 2015, set 15.

You can set the year, month, and day for a day counter, or a month and day only.

Setting a Year, Month, and Day

Setting a year, month, and day displays the number of days from the preset date to

the Timekeeping Mode date. There is no indication of whether the preset date is

before or after the Timekeeping Mode date.

You can use this type of setting to keep track of the number of days since you were

born or the number of days you have been married, or to count down the number of

days until graduation, etc.

Setting a Month and Day Only

With this type of setting, you specify " – – " for the year.

Number of days

The " – – " setting is located between the years 39 (2039)

Day counter's

and 40 (1940).

number

Setting a month and a day without a year displays the

number of days left until that month and day.

You can use this type of setting to count down the num-

ber of days until your next birthday, etc.

Recalling Day Counter Data

In the Day Counter Mode, press C to scroll through the

day counters.

To set the target date

Month

Year

1. In the Day Counter Mode, press C to display the num-

Day

ber of the counter you want to set.

2. Hold down A until the year digits start to flash on the

Target date

display. This indicates the input screen.

3. Press B to move the flashing in the sequence shown below.

Press B.

Year

4. Press C to increase the selected digits. Holding down C changes the digits at

high speed.

Holding down B sets today as the target date. You can then make any changes in

the date you want.

5. After you make the settings you want, press A to exit the input screen.

The date can be set within the range of January 1, 1940 to December 31, 2039.

Press B.

Minutes

Month

Day

ALARM MODE

Current time

When a Daily Alarm is turned on, the alarm sounds for

about 20 seconds at the preset time each day. Press any

Daily Alarm

button to stop the alarm after it starts to sound. When the

indicator

Hourly Time Signal is turned on, the watch beeps every

hour on the hour.

To set the alarm time

1. Hold down A while in the Alarm Mode, until the hour

digits starts to flash on the display, indicating the set-

ting screen. The alarm is automatically turned on at this

time.

2. Press B to change the selection in the sequence shown

Hour

below.

Minutes

Mode indicator

Hourly Time Signal

indicator

3. Press C to increase the selected digits. Holding down C changes the digits at

high speed.

4. After you make the settings you want, press A to exit the input screen.

The format (12-hour and 24-hour) of the alarm time matches the format you select

for normal timekeeping.

When setting the alarm time using the 12-hour format, take care to set the time

correctly as "am" or "pm."

To stop the alarm

Press any button to stop the alarm after it starts to sound.

To turn a daily Alarm and the Hourly Time Signal on and off

Press C while in the Alarm Mode to change the status of the Daily Alarm and Hourly

Time Signal in the following sequence.

Press C.

Both OFF

Daily Alarm

Only

To test the alarm

Hold down B in any mode (except when a setting screen is on the display) to sound

the alarm. Note that this operation also changes the mode.

2330-2

Press B.

Hour

Minutes

Hourly Time

Both ON

Signal Only