Casio 2358 Manual

Navegue en línea o descargue pdf Manual para Ver Casio 2358. Casio 2358 3 páginas. Casio abx23-8bv: supplementary guide

Module No. 2358

Congratulations upon your selection of this CASIO watch. To get the most out of your purchase, be sure to carefully read this manual and keep it on hand for later reference when necessary.

Button operations are indicated using the letters shown in the illustration.

Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be

found in the "REFERENCE" section.

Crown

Press C to change from mode to mode.

In any mode, press L to illuminate the display.

If the digital display of your watch is continuously changing, see "Auto Display Function" for information on how to stop it.

Timekeeping Mode

Use the Timekeeping Mode to set and view the current time and date.

In the Timekeeping Mode, press D to change the display format as shown below.

Date

Day of week

Year

Month – Day

indicator

The time zone that corresponds to your Home City code (see below) flashes on the

Date/Time screen's world map.

Read This Before You Set the Time and Date !

The digital times displayed in the Timekeeping Mode and World Time Mode are

linked. Because of this, make sure you select a city code for your Home City (the city

where you normally use the watch).

This watch features separate digital and analog timekeeping. Note that the digital

time and analog time are independent of each other, and must be set separately.

To set the digital time and date

1. In the Timekeeping Mode, hold down A until the

City code

2. Press C to move the flashing in the sequence shown

3. When the setting you want to change is flashing, press D to change it as described

below.

Setting

Press D to reset to 00.

Seconds

Press D to toggle between Daylight Saving Time and standard

DST

time. See "Daylight Saving Time (DST)" for details.

City Code, Hour,

Press D(+) to change the setting.

Minutes, Year,

Month, Day

See "CITY CODE TABLE" for a complete list of available codes.

Pressing D while the seconds count is in the range of 30 to 59 resets the

seconds to 00 and adds 1 to the minutes. In the range of 00 to 29, the minutes

count is unchanged.

4. Press A to exit the setting screen.

Note

The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

The year can be set in the range of 2000 to 2039.

The watch's built-in full automatic calendar automatically makes allowances for

different month lengths and leap years. Once you set the date, there should be no

reason to change it except after you have the watch's battery replaced.

To toggle between 12-hour and 24-hour timekeeping

While the Date/Time screen is on the display in the Timekeeping Mode, press B to

toggle between 12-hour and 24-hour timekeeping for the digital time.

With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, with 24

indicator.

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is also

applied in all other modes.

Telememo Mode

Press C.

TIMEKEEPING

Date/Time

Analog

World map

Hour hand

Seconds

Hour : Minutes

Second hand

second digits start to flash, which indicates the setting

screen.

below to select other settings.

Seconds

DST

City Code

Day

Month

Year

Do this...

GETTING ACQUAINTED

GENERAL GUIDE

World Time Mode

Daylight Saving Time (DST)

Daylight Saving Time advances the time setting by one hour from Standard Time.

Remember that not all countries or even local areas use Daylight Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

Minute hand

To set the analog time

1. Pull the crown out.

This causes the second hand to stop.

2. Set the minute and hour hands by turning the crown.

3. Push the crown back in to restart timekeeping.

Remaining memory

Number of records stored

Hour

Minutes

Name

Telephone number

To create a new Telememo record

Text area

Number area

New Data screen

Alarm Mode

1. In the Timekeeping Mode, hold down A until the

second digits start to flash, which indicates the setting

screen.

2. Press C to move the flashing to the DST On/Off

setting.

3. Press D to toggle between Daylight Saving Time and

standard time.

Note that you cannot switch between standard time

GMT differential

and Daylight Saving Time while

the city code.

4. Press A to exit the setting screen.

The DST indicator appears on the display to indicate

that daylight saving time is turned on.

TELEMEMO

Telememo lets you store up to 30 records, each

containing name and telephone number data. Records

are automatically sorted based on the characters of the

name. You can recall records by scrolling through them

on the display.

See "CHARACTER LIST" for details on how the watch

sorts records.

The name can show only three characters at a time, so

longer text scrolls continuously from right to left.

All of the operations in this section are performed in the

Telememo Mode, which you enter by pressing C.

1. In the Telememo Mode, press B or D until the new

data screen appears.

The new data screen is the one that is blank (contains

no name and telephone number).

If the message

means that memory is full. To store another record,

you will first have to delete some of the records stored

in memory.

2. Hold down A until the flashing cursor ( ) appears in

the text area of the display, which indicates the setting

screen.

3. Use B and D to change the character at the cursor

position in the text area. The character changes in the

following sequence.

Press

(space)

2358-1

Stopwatch Mode

is selected as

appears on the display, it