Casio 2358 Manual - Página 2

Navegue en línea o descargue pdf Manual para Ver Casio 2358. Casio 2358 3 páginas. Casio abx23-8bv: supplementary guide

Imprimir página

4. When the character you want is at the cursor position, press C to move the cursor

to the right.

5. Repeat steps 3 and 4 until the name is complete.

You can input up to eight characters for the name.

6. After you input the name, press C as many times as necessary to move the cursor

to the number area.

You can input up to eight characters for the name. When the cursor is located at

the eighth space of the name, moving the cursor to the right causes it to jump to

the first digit of the number. When the cursor is at the 12th digit of the number,

moving it to the right (by pressing C) causes it to jump to the first character in the

name.

7. Use B and D to change the character (hyphen, number, or space) at the cursor

position in the number area. The character changes in the following sequence.

Press

8. When the character you want is at the cursor position, press C to move the cursor

to the right.

9. Repeat steps 7 and 8 until you complete number input.

You can input up to 12 digits for the number.

The number initially contains all hyphens. You can leave the hyphens or replace

them with numbers or spaces.

10. Press A to store your data and return to the Telememo record screen (without

the cursor).

When you press A to store data, the message

for a while, indicating that data is being sorted. After the sort operation is

complete, the Telememo record screen appears.

To recall Telememo records

In the Telememo Mode, use D(+) and B(–) to scroll through Telememo records on

the display.

To edit a Telememo record

1. In the Telememo Mode, scroll through the records and display the one you want to

edit.

2. Hold down A until the flashing cursor appears on the display.

3. Use C to move the flashing to the character you want to change.

4. Use B and D to change the character.

For details on inputting characters, see "To create a new Telememo record" (step

3 for name input and 7 for number input).

5. After making the changes that you want, press A to store them and return to the

Telememo record screen.

To delete a Telememo record

1. In the Telememo Mode, scroll through the records and display the one you want to

delete.

2. Hold down A until the flashing cursor appears on the display.

3. Press B and D at the same time to delete the record.

The message

appears to indicate that the record is being deleted. After the

record is deleted, the cursor appears on the display, ready for input.

4. Input data or press A to return to the Telememo record screen.

WORLD TIME

World Time shows the current time in 27 cities (29 time

GMT differential

zones) around the world.

World map

For full information on city codes, see the "CITY CODE

TABLE".

The time zone that corresponds to the selected city

code flashes on the world map.

All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C.

To view the time in another city code

While in the World Time Mode, press D to scroll forward

through the city codes (time zones) and B to scroll back.

If the current time shown for a city is wrong, check your

Timekeeping Mode time and Home City code settings

City code

and make the necessary changes.

Current time in the

selected city code

To toggle a city code time between standard time and Daylight Saving Time

1. In the World Time Mode, use B and D to display the

city code (time zone) whose standard time/Daylight

Saving Time setting you want to change.

2. Hold down A for about two seconds to toggle Daylight

Saving Time (DST displayed) and standard time (DST

not displayed).

The DST indicator is on the display whenever you

display a city code for which Daylight Saving Time is

turned on.

Note that the DST/Standard Time setting affects only

the currently displayed city code. Other city codes are

not affected.

Note that you cannot switch between standard time

and Daylight Saving Time while

the city code.

(space)

may appear on the display

is selected as

ALARM

You can set a Daily Alarm. When an alarm is turned on,

Hourly time signal on

indicator

the alarm tone sounds when the alarm time is reached.

You can also turn on an Hourly Time Signal that causes

Timekeeping Mode time

the watch to beep twice every hour on the hour.

The alarm and Hourly Time Signal operate in

accordance with the current digital time (Timekeeping

Mode time).

All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

Alarm time

Alarm on indicator

To set the alarm time

1. In the Alarm Mode, hold down A until the hour digits of

the alarm time start to flash.

This automatically turns on the alarm.

2. Press C to move the flashing between the hour and

minutes.

3. While a setting is flashing, use D(+) to change it.

When setting the alarm time using the 12-hour format,

take care to set the time correctly as a.m. (no

indicator) or p.m. (P indicator).

4. Press A to return to the alarm display screen.

Daily Alarm Operation

The alarm sounds at the preset time each day for about 20 seconds, or until you stop

it by pressing any button.

The alarm and hourly time signal sound in all modes.

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

To turn the Daily Alarm and Hourly Time Signal on and off

In the Alarm Mode, press B to cycle through the on and off settings as shown below.

Alarm On Indicator/Hourly Time Signal On Indicator

Alarm On

Alarm Off

Signal On

Signal Off

STOPWATCH

The stopwatch lets you measure elapsed time, split times,

1/100 second

and two finishes.

The display range of the stopwatch is 23 hours, 59

minutes, 59.99 seconds.

The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing C.

The time on the screen may not appear to stop

Hours

Seconds

immediately when you press the button to stop an

Minutes

elapsed time operation or perform a split time operation

in the Stopwatch Mode. Despite this, the time recorded

by your button operation is accurate.

To measure times with the stopwatch

Elapsed Time

Start

Stop

Split Time

Start

Split

Two Finishes

Start

Split

First runner

finishes.

2358-2

Alarm On

Alarm Off

Signal Off

Signal On

Re-start

Stop

Clear

Split release

Stop

Clear

Stop

Split release

Clear

Second runner

Record time of

finishes.

second runner.

Record time of

first runner.