Danfoss TP7000 Series Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Termostato Danfoss TP7000 Series. Danfoss TP7000 Series 11 páginas. Electronic programmable room thermostat
También para Danfoss TP7000 Series: Manual de instrucciones de instalación (9 páginas), Instrucciones de instalación Instrucciones de uso (14 páginas)

1.8 Before you change the preset programmes

Your installer will have set your unit to operate in either 7-day mode

or 5/2 day mode. To tell which mode your unit is set press PROG

until Event 1 ﬂ ashes in the display.

1 2 3 4 5

1.81 Programming in 7-day mode

(separate programmes for each day of the week)

a) Press PROG until Event 1 ﬂ ashes, then

press DAY to move from current day to

Day 1.

b) Amend the time and temperature as

follows:

Use + and – buttons to alter time

(press and hold to change in 10 min

increments).

ii)

Use

temperature in 0.5°C (1°F) steps.

iii) Press NEXT to advance to next

Event.

iv) Repeat steps i,ii & iii above for Events

2, 3, 4, 5 & 6.

c) When all 6 events are correct, press DAY

to programme events for Day 2.

This unit is in 7-day mode and you can programme

diﬀ erent settings for each day of the week (see page

8-9).

This unit is in 5/2 day mode and you can enter one of

set of programmes for weekdays and another set for

weekends (see page 91).

and

buttons to alter

TP7000 RANGE