Danfoss ECL Comfort 210 Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Unidad de control Danfoss ECL Comfort 210. Danfoss ECL Comfort 210 16 páginas. Extended heat cut-out
También para Danfoss ECL Comfort 210: Manual del usuario (12 páginas), Manual del usuario (12 páginas), Manual del usuario (6 páginas), Manual de instalación (4 páginas), Manual de instalación (20 páginas), Manual de instrucciones (10 páginas), Manual de instalación (7 páginas), Manual de instalación (16 páginas), Manual de instalación (16 páginas), Manual de instalación (16 páginas), Manual de instalación (16 páginas), Manual de instalación (20 páginas), Manual de instalación (16 páginas), Manual de montaje (16 páginas)

ECL Comfort 210 / 296 / 310, Floor (Screed) Drying Program

2.0 Installation

Application keys for the ECL Comfort 210 / 296 / 310 series, which

control heating circuits, offer a floor drying program, also called

screed drying program.

The floor drying program is used after a new floor heating circuit

has been placed and fresh-from-factory concrete covers the floor

heating pipes. The floor drying program can also be used, when

the self-leveling screed has been distributed.

The floor drying program can be started immediately in order to

dry-out the concrete / screed according to a set time / temperature

plan.

Navigation to the menu for 'Floor drying':

Common controller > MENU > Floor drying:

Functional heating:

The flow temperature is controlled

according to a set time / temperature plan

in order to dry-out the concrete / screed.

Curing heating:

The flow temperature is controlled

according to a set time / temperature plan

in order to cure the concrete / screed. The

curing must be done before mounting of,

for example, tiles.

Functional and curing heating can work as one process or

separated.

The time / temperature plan is set and is common for selected

circuits.

VI.JM.P2.02

= Time

= Functional heating

# 1 #

= Curing heating

# 2 #