Danfoss ECL Comfort 210 운영 매뉴얼 - 페이지 5

{카테고리_이름} Danfoss ECL Comfort 210에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss ECL Comfort 210 16 페이지. Extended heat cut-out
Danfoss ECL Comfort 210에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지), 사용자 설명서 (12 페이지), 사용자 설명서 (6 페이지), 설치 매뉴얼 (4 페이지), 설치 매뉴얼 (20 페이지), 운영 매뉴얼 (10 페이지), 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (16 페이지), 마운팅 매뉴얼 (16 페이지)

페이지 인쇄
Danfoss ECL Comfort 210 운영 매뉴얼
ECL Comfort 210 / 296 / 310, Floor (Screed) Drying Program

2.0 Installation

2.1 Description, in general

Application keys for the ECL Comfort 210 / 296 / 310 series, which
control heating circuits, offer a floor drying program, also called
screed drying program.
The floor drying program is used after a new floor heating circuit
has been placed and fresh-from-factory concrete covers the floor
heating pipes. The floor drying program can also be used, when
the self-leveling screed has been distributed.
The floor drying program can be started immediately in order to
dry-out the concrete / screed according to a set time / temperature
plan.
Navigation to the menu for 'Floor drying':
Common controller > MENU > Floor drying:
Functional heating:
The flow temperature is controlled
according to a set time / temperature plan
in order to dry-out the concrete / screed.
Curing heating:
The flow temperature is controlled
according to a set time / temperature plan
in order to cure the concrete / screed. The
curing must be done before mounting of,
for example, tiles.
Functional and curing heating can work as one process or
separated.
The time / temperature plan is set and is common for selected
circuits.
VI.JM.P2.02
= Time
T
= Functional heating
# 1 #
= Curing heating
# 2 #
© Danfoss | 2017.08 | 5