Danfoss iSave 21 Manual de servicio - Página 16
Navegue en línea o descargue pdf Manual de servicio para Bomba de agua Danfoss iSave 21. Danfoss iSave 21 18 páginas. Energy recovery device disassembling and assembling
Imprimir página
Service guide
16
Disassembling and assembling iSave 21
13.
Make sure that the guide pin is located in
the location hole.
15.
Bolt the flange onto the vane pump.
Tighten the bolt with 30 Nm ±3 Nm.
17.
Change the two O-rings in the flange.
180R9219 | 521B1171 | DKCFN.PI.003.K5.02 / 03.2016
14.
Change the O-ring in the HP out
connection flange.
16.
Fit the coupling into the pump.
Glue the threat on the bolt with "Loctite
270" and tighten the bolt with 10 Nm±1 Nm.