Danfoss iSave 21 서비스 매뉴얼 - 페이지 16
{카테고리_이름} Danfoss iSave 21에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss iSave 21 18 페이지. Energy recovery device disassembling and assembling
페이지 인쇄
Service guide
16
Disassembling and assembling iSave 21
13.
Make sure that the guide pin is located in
the location hole.
15.
Bolt the flange onto the vane pump.
Tighten the bolt with 30 Nm ±3 Nm.
17.
Change the two O-rings in the flange.
180R9219 | 521B1171 | DKCFN.PI.003.K5.02 / 03.2016
14.
Change the O-ring in the HP out
connection flange.
16.
Fit the coupling into the pump.
Glue the threat on the bolt with "Loctite
270" and tighten the bolt with 10 Nm±1 Nm.