Danfoss iSave 21 ERD Manual de servicio - Página 2

Navegue en línea o descargue pdf Manual de servicio para Bomba de agua Danfoss iSave 21 ERD. Danfoss iSave 21 ERD 12 páginas. Vane pump upgrade kit

Danfoss iSave 21 ERD Manual de servicio
Service guide | Disassembling and assembling iSave 21 vane pump with upgrade kit 180F4161

Table of Contents

1.

General Introduction

2
Contents
1.
General Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1
Parts included in the vane pump upgrade kit 180F4161 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.
Disassembling the iSave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.
Disassembling the vane pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.
4.
Assembling the iSave. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.
Exploded view vane pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
6.
Exploded view iSave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
This document covers the instructions for
installing the vane pump upgrade kit 180F4161.
Important: It is essential that the iSave and
vane pump are serviced in conditions of abso-
lute cleanliness.
For a better understanding of the vane pump and
iSave, please see the exploded views in the sec-
tions 5 and 6.
The weight of the iSave is 65 kg / 143 lb
and it must be lifted with suitable lifting
equipment.
To prevent cold welding, lubricate threads of
screws with grease; screw them into the compo-
nent and tighten them by the hand. Use PTFE
lubrication type.
Tools needed for upgrading vane pump::
- 10 mm socket
- Torque wrench
- Adjustable spanner
- Loctite 270
- 6 mm allen key socket (160 mm long)
180R9402 | 521B1455 | DKCFN.PI.003.T1.02 | 10.2017
1.1
Parts included in the vane pump
upgrade kit 180F4161
Qty.
Description
1
Stator ring
8
Vanes
1
Side plate out
1
Side plate in
4
Peek pin Ø6.9
2
Pin Ø6x10
2
Pin Ø4x9
3
O-ring 112x2.5
1
O-ring 44x3
1
O-ring 80x2
2
Steel location pin for stator ring
10
Screws for M8x16
10
Screws for M8x25
8
Screws for M8x65