Danfoss iSave 21 ERD Servis Kılavuzu - Sayfa 2
Su Pompası Danfoss iSave 21 ERD için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Danfoss iSave 21 ERD 12 sayfaları. Vane pump upgrade kit
Sayfayı Yazdır
Service guide | Disassembling and assembling iSave 21 vane pump with upgrade kit 180F4161
Table of Contents
1.
General Introduction
2
Contents
1.
General Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1
Parts included in the vane pump upgrade kit 180F4161 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.
Disassembling the iSave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.
Disassembling the vane pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.
Assembling the vane pump - with parts from the vane pump upgrade kit . . . . . . . . . . . . . . . . 6
4.
Assembling the iSave. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.
Exploded view vane pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
6.
Exploded view iSave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
This document covers the instructions for
installing the vane pump upgrade kit 180F4161.
Important: It is essential that the iSave and
vane pump are serviced in conditions of abso-
lute cleanliness.
For a better understanding of the vane pump and
iSave, please see the exploded views in the sec-
tions 5 and 6.
The weight of the iSave is 65 kg / 143 lb
and it must be lifted with suitable lifting
equipment.
To prevent cold welding, lubricate threads of
screws with grease; screw them into the compo-
nent and tighten them by the hand. Use PTFE
lubrication type.
Tools needed for upgrading vane pump::
- 10 mm socket
- Torque wrench
- Adjustable spanner
- Loctite 270
- 6 mm allen key socket (160 mm long)
180R9402 | 521B1455 | DKCFN.PI.003.T1.02 | 10.2017
1.1
Parts included in the vane pump
upgrade kit 180F4161
Qty.
Description
1
Stator ring
8
Vanes
1
Side plate out
1
Side plate in
4
Peek pin Ø6.9
2
Pin Ø6x10
2
Pin Ø4x9
3
O-ring 112x2.5
1
O-ring 44x3
1
O-ring 80x2
2
Steel location pin for stator ring
10
Screws for M8x16
10
Screws for M8x25
8
Screws for M8x65