DUO-FAST DF175-CN Manual de instrucciones y esquema - Página 9
Navegue en línea o descargue pdf Manual de instrucciones y esquema para Pistola de clavos DUO-FAST DF175-CN. DUO-FAST DF175-CN 12 páginas. Cap nailer
Imprimir páginaSTOP USING THE TOOL IMMEDIATELY IF ANY OF THE FOLLOWING
PROBLEMS OCCUR. SERIOUS PERSONAL INJURY COULD OCCUR.
ANY REPAIRS OR REPLACEMENTS MUST BE DONE BY A QUALIFIED
PERSON OR AN AUTHORIZED SERVICE CENTER ONLY.
SYMPTOM
Tool runs slow or has loss of
power.
Fasteners are jammed in tool.
No cap feed.
TROUBLESHOOTING
WARNING
POSSIBLE PROBLEMS
Tool not lubricated
sufficiently.
Broken spring in cap
assembly.
Exhaust port in cap is
blocked.
Driver guide worn or damaged.
Driver is damaged.
Fasteners are not correct size.
Fasteners are bent.
Magazine or nose screws are
loose.
Cap feed switch off.
Cap chain broken in track.
Air tube to pusher cylinder cut
or pinched.
Holder spring ("A" plate) bent
or broken.
Pusher finger bent or broken.
Air leaks on main body.
Tool needs to be lubricated.
Spring needs to be replaced.
Damaged internal parts need
to be replaced.
Replace driver guide.
Replace driver.
Fasteners recommended for
tool must be used.
Replace with undamaged
fasteners.
Screws need to be tightened.
Switch cap feed on.
Feed caps from canister to
pusher.
Replace air tube.
Replace "A" plate.
Replace pusher.
Replace air leaks. (See
troubleshooting air leaks.)
(7)
SERVICE