DUO-FAST DF175-CN Bedieningshandleiding en schema - Pagina 9

Blader online of download pdf Bedieningshandleiding en schema voor {categorie_naam} DUO-FAST DF175-CN. DUO-FAST DF175-CN 12 pagina's. Cap nailer

Pagina afdrukken

STOP USING THE TOOL IMMEDIATELY IF ANY OF THE FOLLOWING

PROBLEMS OCCUR. SERIOUS PERSONAL INJURY COULD OCCUR.

ANY REPAIRS OR REPLACEMENTS MUST BE DONE BY A QUALIFIED

PERSON OR AN AUTHORIZED SERVICE CENTER ONLY.

SYMPTOM

Tool runs slow or has loss of

power.

Fasteners are jammed in tool.

No cap feed.

TROUBLESHOOTING

WARNING

POSSIBLE PROBLEMS

Tool not lubricated

sufficiently.

Broken spring in cap

assembly.

Exhaust port in cap is

blocked.

Driver guide worn or damaged.

Driver is damaged.

Fasteners are not correct size.

Fasteners are bent.

Magazine or nose screws are

loose.

Cap feed switch off.

Cap chain broken in track.

Air tube to pusher cylinder cut

or pinched.

Holder spring ("A" plate) bent

or broken.

Pusher finger bent or broken.

Air leaks on main body.

Tool needs to be lubricated.

Spring needs to be replaced.

Damaged internal parts need

to be replaced.

Replace driver guide.

Replace driver.

Fasteners recommended for

tool must be used.

Replace with undamaged

fasteners.

Screws need to be tightened.

Switch cap feed on.

Feed caps from canister to

pusher.

Replace air tube.

Replace "A" plate.

Replace pusher.

Replace air leaks. (See

troubleshooting air leaks.)

(7)

SERVICE