Free The Tone ARC-4 Procedimientos de actualización del firmware - Página 13
Navegue en línea o descargue pdf Procedimientos de actualización del firmware para Equipos de grabación Free The Tone ARC-4. Free The Tone ARC-4 18 páginas. Audio routing controller
También para Free The Tone ARC-4: Manual del usuario (16 páginas)
Imprimir página
After selecting the interface to be used, its name is shown at the bottom of the screen.
3. Making Backup of Preset Data
1)
Connect the ARC-4's MIDI OUT/THRU plug to the MIDI interface's MIDI IN plug.
2)
On the ARC-4 in Edit mode, select "DUMP LOAD" and send the data.
For details, please refer to "Receiving ARC-4's Data (DP-LD)" in ARC-4 Owner's Manual (p.24).
3)
During data transmission the Display-1 on the ARC-4 counts up from "000" to "300." "MIDI In" in the SendSx screen also counts up.
NOTE: If, upon reception of the preset, SendSx starts and selects the MIDI interface correctly, you do not have to operate SendSx.
13