Free The Tone ARC-4 Procedimientos de actualización del firmware - Página 18
Navegue en línea o descargue pdf Procedimientos de actualización del firmware para Equipos de grabación Free The Tone ARC-4. Free The Tone ARC-4 18 páginas. Audio routing controller
También para Free The Tone ARC-4: Manual del usuario (16 páginas)
Imprimir página
4)
On the ARC-4 in Edit mode, select "DUMP LOAD" and set it to be ready for data reception.
For details, please refer to "Receiving ARC-4's Data (DP-LD)" in ARC-4 Owner's Manual (p.23).
5)
Click "Send(F4)" in SendSx.
6)
The Display-1 on the ARC-4 counts up from "1" to "300" and shows "WAIT," then "DONE." If the unit returns to Edit mode, the
writing process is completed.
NOTE: "WAIT" may be indicated for more than 20 seconds. Please do not turn off the power and be sure to wait until "DONE" is
shown.
7)
Press the MODE switch to return the unit to its normal operation mode. This completes the firmware update steps.
18