Free The Tone ARC-4 Procedimentos de atualização do firmware - Página 18
Procurar online ou descarregar pdf Procedimentos de atualização do firmware para Equipamento de gravação Free The Tone ARC-4. Free The Tone ARC-4 18 páginas. Audio routing controller
Também para Free The Tone ARC-4: Manual do Proprietário (16 páginas)
Imprimir página
4)
On the ARC-4 in Edit mode, select "DUMP LOAD" and set it to be ready for data reception.
For details, please refer to "Receiving ARC-4's Data (DP-LD)" in ARC-4 Owner's Manual (p.23).
5)
Click "Send(F4)" in SendSx.
6)
The Display-1 on the ARC-4 counts up from "1" to "300" and shows "WAIT," then "DONE." If the unit returns to Edit mode, the
writing process is completed.
NOTE: "WAIT" may be indicated for more than 20 seconds. Please do not turn off the power and be sure to wait until "DONE" is
shown.
7)
Press the MODE switch to return the unit to its normal operation mode. This completes the firmware update steps.
18