Free The Tone ARC-4 Procédures de mise à jour du micrologiciel - Page 18
Parcourez en ligne ou téléchargez le pdf Procédures de mise à jour du micrologiciel pour {nom_de_la_catégorie} Free The Tone ARC-4. Free The Tone ARC-4 18 pages. Audio routing controller
Également pour Free The Tone ARC-4 : Manuel du propriétaire (16 pages)
Imprimer la page
4)
On the ARC-4 in Edit mode, select "DUMP LOAD" and set it to be ready for data reception.
For details, please refer to "Receiving ARC-4's Data (DP-LD)" in ARC-4 Owner's Manual (p.23).
5)
Click "Send(F4)" in SendSx.
6)
The Display-1 on the ARC-4 counts up from "1" to "300" and shows "WAIT," then "DONE." If the unit returns to Edit mode, the
writing process is completed.
NOTE: "WAIT" may be indicated for more than 20 seconds. Please do not turn off the power and be sure to wait until "DONE" is
shown.
7)
Press the MODE switch to return the unit to its normal operation mode. This completes the firmware update steps.
18