Danfoss 176F4184 Manual de instalación - Página 9

Navegue en línea o descargue pdf Manual de instalación para Equipamiento industrial Danfoss 176F4184. Danfoss 176F4184 14 páginas. In-back/out-back cooling kit for fk09a/fb09a and fk10a/fb10a

Imprimir página
In-back/Out-back Cooling Kit for FK09a/FB09a and FK10a/FB10a
Installation Guide
A
B
Illustration 7: Dimensions for Mounting FK10a/FB10a Frequency Converter
2.
Adhere the 2 seal plate gaskets to the seal plates, 1 per plate.
3.
Place 2 seal plates inside the back channel and over the 2 mounting slots in the lower edge of the frequency converter
enclosure.
4.
Lift the frequency converter and fasten 4 M10x30 mm screws, 2 in the upper mounting holes and 2 in the lower mounting
holes.
The 2 seal plates function as washers for the lower mounting screws. Torque all fasteners to 19 Nm (170 in-lb).
Danfoss A/S © 2023.09
33
(1.3)
11
0.43
74
(2.9)
A
23.7
(0.93)
B
Installation
280
(11)
316
(12.5)
271
(10.7)
AN440656954288en-000101 / 136R0326 | 9