AudioControl D-4.800 Manual de inicio rápido - Página 3
Navegue en línea o descargue pdf Manual de inicio rápido para Amplificador AudioControl D-4.800. AudioControl D-4.800 17 páginas. High power multi channel amplifier with dsp matrix processor
También para AudioControl D-4.800: Manual de inicio rápido (18 páginas)
Imprimir página
Features
1. Fuses 40A – Replace these fuses only with the exact same style
and Ampere rating. Disconnect 12V power before changing or
inspecting the fuses.
2. Power Input Terminal +12V – The left screw terminal connects
to the +12V battery binding post of the vehicle. Use good quality
insulated wire, between 8 and 3 gauge.
Power Input Terminal Ground – The right screw terminal con-
nects to a good ground connection on the vehicle. Use good qual-
ity insulated wire, between 8 and 3 gauge.
Remote Power Input Terminal – The middle screw terminal
connects to the 12V remote trigger output of some head units.
When the head unit is turned on, then the D-4.800 will turn on.
Alternatively, you can use the GTO™ feature of the D-4.800 so it
will turn on when an audio signal is detected at the speaker-level
or line-level inputs of channels 1-2 (front).
9
10
11
12
13
1
2
3
4
3. RCA Analog Line-Level Inputs – The line-level output from the
4. RCA Analog Line-Level Outputs – These line-level analog
5. Speaker-Level Inputs – The speaker-level output from amplifiers
14
15
5
6
7
8
head unit or factory-installed radios can connect here, so the
D-4.800 will receive the line-level audio signals.
outputs from the D-4.800 connect to the line-level inputs of your
power amplifiers and other equipment. The matrix capabilities of
the D-4.800 allow you to pick and choose the outputs from any
combination of inputs, add crossovers and EQ as required.
and factory installed radios can connect here, so the D-4.800 will
receive the audio signals this way and do its thing. Make sure that
you follow the plus and minus polarity markings on the D-4.800
and match it to the polarity of the speaker wiring. Speaker-level
Inputs 1-2 have the GTO™ (great turn on) signal-sense circuit that
will awaken the D-4.800 when an input signal is present.
3