AudioControl ACX-3.2 Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Ecualizador estéreo AudioControl ACX-3.2. AudioControl ACX-3.2 20 páginas. All-weather equalizer & crossover with paging mic
Imprimir páginaGuided Tour of the ACX-3.2 (continued)
13. Balanced Input – (Located under the cover).
These jumpers allow you utilize or bypass the
balanced input circuitry. Although it is shipped
in the balanced mode, which is often best, it may
be necessary to change this depending upon the
confi guration of the components you use.
14. Mic Signal Routing – (Located under the cover).
From the factory, signal from the microphone is
routed to the rear outputs. This jumper allows you
to route microphone signal to both front and rear
outputs if desired. Watch out for feedback!
15. Ground Isolation – (Located under the cover).
This feature allows you to change the power
supply ground for diff erent systems. When the
ACX-3.2 is shipped from the factory, the jumper
is set to the fully isolated position, which is
generally the best. If you have a ground loop noise
(alternator whine) in your system, experiment
with diff erent settings. To change the settings, turn
the system off , carefully move the black jumper
from the center two pins (Isolated), and move it to
either the top two pins (200 Ω), or the bottom two
pins (Ground).
16. Illumination – (Located under the cover). These
jumpers let you change the back-light illumination
to Cool Blue or Hot Red. Given that we are
acclimated to sun-free life in the rainforest, we
have shipped the ACX-3.2 in the Cool Blue mode.
MIC SIGNAL ROUTING
Front/Rear
1
Rear
Ground
1
Isolated
200Ω
GROUND ISOLATION
Red
1
Blue
ILLUMINATION
Unbalanced
1#
Balanced
BALANCED INPUT
Owner's Enjoyment Manual
6