Freedom Innovations Kinnex 2.0 Manual de instrucciones - Página 4
Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento médico Freedom Innovations Kinnex 2.0. Freedom Innovations Kinnex 2.0 11 páginas. Prosthetist
También para Freedom Innovations Kinnex 2.0: Manual del paciente (2 páginas), Manual de instalación (2 páginas), Manual de referencia (2 páginas)
![Freedom Innovations Kinnex 2.0 Manual de instrucciones](/uploads/products/server2/1692374/1692374.jpg)
Warnings / Safety Precautions
Failure to comply with safety precautions can result in Kinnex
•
malfunctioning and risk of injury to the user.
Always exercise good judgment and common sense when
•
using Kinnex.
Initial operating of Kinnex should be done in the presence of
•
a trained care professional.
Do not attempt to open or modify any component of Kinnex.
•
If any issues or concerns with the Kinnex arise, contact
•
Prosthetist for assistance. DO NOT attempt to make technical
repairs.
Cover Kinnex with a foot cover while in use to prevent foreign
•
objects from being lodged in joints.
Engage Kinnex Manual Lock when driving a vehicle.
•
(see "Manual Lock")
When the battery is completely depleted the Manual Lock
feature is not available, and driving is NOT recommended
Engage Kinnex Manual Lock when descending stairs step
•
over step.
Leaving the Manual Lock engaged can result unintentional
•
loss of stability if user forgets ankle is locked.
Improper and unsafe use of Kinnex may result in injury.
•
Please read the instruction manual thoroughly before using.
Do not use Kinnex while the battery is charging. Be sure to
•
disconnect it from the charger prior to putting on the
prosthesis.
If it becomes necessary to isolate Kinnex from the mains
•
while charging, unplug the battery charger.
If unusual movement or product wear is detected in
•
a structural part of a prosthesis at any time, immediately
discontinue use of the device and consult a clinical specialist.
Do not use if Kinnex enclosure or covers are broken.
•
Kinnex contains a Lithium-ion battery that is not field
•
replaceable and requires factory service for repair.
Lithium-ion batteries contain hazardous metals and should
never be disposed of in residential or commercial garbage.
They should never be incinerated because they may explode.
Reference local regulations for proper disposal of product.
Kinnex contains small parts and cords that can be a potential
•
choking hazard.
Kinnex is not for running, jumping or high activity usage.
•
6
Freedom Innovations |
Product Description
Kinnex is a microprocessor controlled hydraulic ankle/foot
that monitors sensors to control plantar and dorsiflexion
resistance.
Intended Use
Kinnex is intended for use by individuals with lower limb
amputations who would benefit from improved gait dynamics.
Indications
Kinnex is indicated for use as a component in a prosthetic leg
for individuals with lower limb deficiency including:
Individuals with unilateral or bilateral transtibial
•
amputations
Individuals with unilateral congenital limb loss
•
Product Technical Specs
Kinnex is tested and compliant with the following standards
MDD 93/42/EEC
IEC/EN60601-1
•
•
ISO13485
ISO 10328
•
•
Physical Properties
Weight Limit for low activity users: 125kg/275lbs
Weight Limit for moderate activity users: 100kg/220lbs
Average Product Weight: 1.49kg/3.28lbs (without footshell)
Build Height: 186mm / 7.32in
Heel height adjustability: 0-51mm / 0-2in
Suitable for ambulatory level: K3
Environmental
Operating Temperature Range: 0 to 45 °C / 32 to 113 °F
•
Storage Temperature Range: -20 to 80 °C / -4 to 176 °F
•
Humidity Range: 0 – 100%
•
Altitude Range: 0-5,000 m (0-16,400 ft)
•
Water resistance: rated to IP67
•
- Kinnex is safe for occasional submersion in fresh
water up to 1 m (3 ft) for up to 30 minutes. The
user should ensure the charging port cover is
properly inserted prior to water exposure. The
user should dry the ankle with a towel once out
of the water.
- Kinnex should not be used for bathing.
- Kinnex should not be immersed in saltwater or
chlorinated water as these may cause corrosion.
Failure to comply will void the warranty.
- If Kinnex is sprayed by or accidentally submerged
in salt water or chlorinated water, immediately
rinse with fresh water and allow to dry.
Kinnex 2.0
| Instructions for Use
7