Conquer 400-STFLD Instrucciones - Página 2
Navegue en línea o descargue pdf Instrucciones para Accesorios para bicicletas Conquer 400-STFLD. Conquer 400-STFLD 4 páginas. Pro portable mechanic bike repair stand bicycle workstand
Imprimir páginaOverview
Ensure the repair stand is on a flat and level surface prior to use.
1. Do not exceed the maximum extension of the bike mounting tube (B).
NOTE: there is a maximum extension mark on the tube.
2. Choose your clamping position on the bike - use the seat post to avoid frame
damage. Try to balance bicycle weight to avoid tipping. It may be best to angle front
wheel toward the ground to balance the bike.
3. For carbon and delicate frames, clamp on the seat post as clamping the frame may
cause damage. If you must clamp the frame, do not clamp on the internal cable housing
4. To stabilize the front wheel, use the front wheel stabilizer (F) between the front wheel
and the extension tube (B). (see fig 1- 1)
Release the lever (a) on the head to loosen part (b). You can adjust the bicycle clamp in
a full 360 range of motion. (fig 2-1). Lock the clamp lever down to firmly secure the bike
in place. Do not crush bike or over tighten, but ensure it is a snug fit. Ensure the bike is
firmly locked in place prior to use.
(a)
EMAIL:
Product name: PRO Portable Mechanic Bike
Repair Stand Bicycle Workstand
SKU: 400-STFLD
EMAIL:
TEL: 855-349-4327
help.conquerequipment.com
fig 1-1
(b)
WEB: help.conquerequipment.com
fig 2-1
TEL: 855-349-4327