Conquer 400-STFLD 지침 - 페이지 2

{카테고리_이름} Conquer 400-STFLD에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Conquer 400-STFLD 4 페이지. Pro portable mechanic bike repair stand bicycle workstand

Overview

Ensure the repair stand is on a flat and level surface prior to use.

1. Do not exceed the maximum extension of the bike mounting tube (B).

NOTE: there is a maximum extension mark on the tube.

2. Choose your clamping position on the bike - use the seat post to avoid frame

damage. Try to balance bicycle weight to avoid tipping. It may be best to angle front

wheel toward the ground to balance the bike.

3. For carbon and delicate frames, clamp on the seat post as clamping the frame may

cause damage. If you must clamp the frame, do not clamp on the internal cable housing

4. To stabilize the front wheel, use the front wheel stabilizer (F) between the front wheel

and the extension tube (B). (see fig 1- 1)

Release the lever (a) on the head to loosen part (b). You can adjust the bicycle clamp in

a full 360 range of motion. (fig 2-1). Lock the clamp lever down to firmly secure the bike

in place. Do not crush bike or over tighten, but ensure it is a snug fit. Ensure the bike is

firmly locked in place prior to use.

(a)

EMAIL:

Product name: PRO Portable Mechanic Bike

Repair Stand Bicycle Workstand

SKU: 400-STFLD

EMAIL:

TEL: 855-349-4327

help.conquerequipment.com

fig 1-1

(b)

WEB: help.conquerequipment.com

fig 2-1

TEL: 855-349-4327