aevit 2.0 Manual de instalación - Página 15
Navegue en línea o descargue pdf Manual de instalación para Soporte para TV aevit 2.0. aevit 2.0 17 páginas. Mounting brackets
Imprimir páginaSECONdArY INpUT
3.3 SECONdArY FUNCTION SwITChES
The most commonly used switch to operate secondary functions
is the 1.5" Push-Button switch (Figure 33). This switch can be used
to operate the 2.0 Digitone, VIC 2.0 and other single secondary
functions. The same bracket system used to mount the AEVIT 2.0
Display can be used to mount this single switch.
sTEP 1
Attach the 1.5" Push-Button switch to a Mounting
Ball using a small piece of double sided tape.
sTEP 2
Attach this assembly and the second mounting
ball to the Vertical Support as shown in Figure 35.
The completed assembly should look like Figure
36.
sTEP 3
Finally, this assembly can be mounted anywhere
convenient for the client to access. A common
place to locate this switch is on the "B" Pillar as
shown in Figure 37. In this position, a client could
easily use their elbow to activate the switch. how-
ever, any place where the Mounting Ball can be
securely attached can be used. EMC recommends
that a bracket be fabricated and mounted to a sup-
port pillar of the vehicle and the Mounting Ball be
attached to it (hardware not included). Figure 38
shows an example of this.
FIGuRE 38
FABRICATED
BRACkET
(ATTACHED
DIRECTLY TO THE
"b" PIllAR)
HARDwARE FOR
INSTALLINg SECOND
MOuNTING bAll, Is
NOT INcluDED.
DOublE
sIDED TAPE
MOuNTING
BALL
FIGuRE 34
vERTICAL
suPPORT
SECOND
MOuNTING
BALL
FIGuRE 35
AEVIT 2.0 MOUNTING BRACKETS INSTALL MANUAL
FIGuRE 33
1.5" Push-buTTON
SwITCH
FIGuRE 36
FIGuRE 37
3-2