AudioPressBox APB-D116 R-D Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Amplificador AudioPressBox APB-D116 R-D. AudioPressBox APB-D116 R-D 9 páginas. Press conference audio distribution amplifier

Imprimir página

APB-D216 R-D - Back panel (Output section)

Balanced Line Input

PUSH

Parallel

8) Input Jack/XLR connectors

You can connect your source device with 6,3mm JACK or

3-pin XLR connector. Inputs are balanced and line level

only. JACK and XLR connectors are in parallel.

(XLR pinout: 1: Ground; 2: Hot, 3: Cold).

9) Buffered XLR output for expanders

Output for connecting the AudioPressBox expanders

(APB-008 SB-EX, APB-024 R-EX, APB-008 OW, APB-008

IW, APB-P112 SB) to provide up to 24 additional Line/MIC

outputs. Output connector is a 3-pin XLR. Please do not

connect other devices than AudioPressBox expanders!

Output for Expanders

Buffered balanced Ouput

DRIVE CAPABILITY:

Max. 1 pc of APB-024

or 3 pcs of APB-008

10) Dante connector

Connect the Dante interface to the Dante Network. This

interface requires a PoE.

The unit will be visible on the Dante Network as: APB-

D216R-D-serialnumber. It is set to receive the IP address

from a DHCP server.

11) Power supply connector

Please connect supplied AudioPressBox® power supply

here.

& PoE

Good to know:

What are compressor and limiter?

These elements automatically control your signal and

provide the best signal condition for every output. You will

get perfect signal without clipping or distortion. You can

switch this element on or off for each input depending your

needs.

POWER

DC 24V/1A