Constellation audio Virgo Manual del usuario - Página 14

Navegue en línea o descargue pdf Manual del usuario para Amplificador Constellation audio Virgo. Constellation audio Virgo 18 páginas.

Input setup screen

When you press the multifunction button labeled

Setup on the input screen, this screen will appear. It

allows you to set up a home theater bypass input;

set minimum and maximum output levels, and

change the phase of the output signal.

To flip the phase of the Virgo II's output signal: Use

the multifunction button below the display.

To set minimum and/or maximum levels: Adjust the

Virgo II's volume to the desired minimum or

maximum level, and press either the Set Min or Set

Max button, depending on which function you want,

and hit Apply to accept the setting. To clear the

setting, press either CLR Min or CLR Max as

appropriate, or press Default to clear both settings.

To set up a home theater bypass input: First select

the input you want to use for this function, then

adjust the volume on the Virgo II to the desired level.

Push the Set Min button, then the Set Max button,

then the Apply button. To clear these settings, press

CLR Min then CLR Max, or press Default.

Screen setup screen

To adjust LCD brightness: Press the + and – buttons

on the left side of the screen, on either side of the

dark dot.

To adjust LCD contrast: Press the + and – buttons on

the right side of the screen, on either side of the

half-dark/half-light dot.

To adjust LCD backlight timeout: Press the Timeout

button in the lower left corner to keep the screen lit

for 15 sec., 30 sec., 1 min., 5 min., 10 min., and

always on.

To accept or cancel screen setting changes: Press

the Apply or Cancel button, respectively.

To return to the factory default settings: Press the

Default button. This will bring up a screen asking

"Are you sure you want to set this device to its

default settings?" Hit the Yes button to go to default

settings, the No button to cancel.