2E GAMING AIR COOL ACM90D4 Manual de instrucciones - Página 9
Navegue en línea o descargue pdf Manual de instrucciones para Hardware informático 2E GAMING AIR COOL ACM90D4. 2E GAMING AIR COOL ACM90D4 16 páginas. Cpu cooling system
Imprimir página
Installation of CPU cooling system:
Socket AMD: FM1/FM2/AM2/AM2+/AM3/AM3+/AM4 Schema (B)
Attention! To install on an AM4 socket, you need to unscrew the original
motherboard mount.
1. Place the mount with screws (B) in the position indicated in the
schema and fix with screws (D). Please, remove the transparent
protective film from the surface of the processor cooling system
that is in direct contact with the processor.
2. Open the package of thermal paste carefully. Apply thermal grease
to the processor, squeeze a small drop (4-5 mm diameter) onto
the center of the processor. Place the CPU cooler with the screwed
fasteners (B) on the CPU. It is necessary to tighten the screws into
the corresponding holes on the motherboard with a wrench (E)
securely, but not with excessive force, so as not to damage the
fasteners.
3. Connect the fan power to the corresponding connector on the
motherboard (CPU Fan).
4. Connecting the illumination of the upper decorative segment
(MOLEX and 3 pin ARGB LED). MOLEX connection to the power
supply - the backlight will work in ARGB demo mode, 3 pin ARGB
LED - connection to the motherboard + 5V RGB with the ability to
change or synchronize the color change.
Демонтаж оригінального кріплення АМ4 / Демонтаж оригиналь-
ного крепление АМ4 / Dismantling the original mount AM4
9