2E GAMING AIR COOL ACM90D4 운영 매뉴얼 - 페이지 9

{카테고리_이름} 2E GAMING AIR COOL ACM90D4에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 2E GAMING AIR COOL ACM90D4 16 페이지. Cpu cooling system

Installation of CPU cooling system:

Socket AMD: FM1/FM2/AM2/AM2+/AM3/AM3+/AM4 Schema (B)

Attention! To install on an AM4 socket, you need to unscrew the original

motherboard mount.

1. Place the mount with screws (B) in the position indicated in the

schema and fix with screws (D). Please, remove the transparent

protective film from the surface of the processor cooling system

that is in direct contact with the processor.

2. Open the package of thermal paste carefully. Apply thermal grease

to the processor, squeeze a small drop (4-5 mm diameter) onto

the center of the processor. Place the CPU cooler with the screwed

fasteners (B) on the CPU. It is necessary to tighten the screws into

the corresponding holes on the motherboard with a wrench (E)

securely, but not with excessive force, so as not to damage the

fasteners.

3. Connect the fan power to the corresponding connector on the

motherboard (CPU Fan).

4. Connecting the illumination of the upper decorative segment

(MOLEX and 3 pin ARGB LED). MOLEX connection to the power

supply - the backlight will work in ARGB demo mode, 3 pin ARGB

LED - connection to the motherboard + 5V RGB with the ability to

change or synchronize the color change.

Демонтаж оригінального кріплення АМ4 / Демонтаж оригиналь-

ного крепление АМ4 / Dismantling the original mount AM4